Hooking up the Stereo Amp
#1. This is a standard stereo power amp. Connect your cable from the left channel of your output device (a volume controlled pre-amp or HeadRoom Desktop/Micro Amp)into the left inputs of your power amp. Repeat for right channel.
#2 Then connect the speakers to the power amp using speaker cable; be sure to connect the positive (red) terminal post to the positive (usually red) connector on the speaker.
#3 Ensure the power switch is off, and connect the power cable to the amp.
#4 Turn the front panel ‘output’ switch to ‘disable’. Turn on all other audio electronics in the system prior to turning on the amp.
#5 Turn the volume down on the gear feeding the power amp. Turn on Desktop Power Amp rear panel power switch.
#6 Flip front panel ‘output’ switch to ‘enable’. Slowly turn up volume of pre-amp feeding the power amp. Ahh, beautiful music!
For a full size version of this pic click Here.
